CP 0009A - Rotary Drill

The term 'CP 009 Combi drill' denotes the special feature of the tool that it is a combination of drill and hammer. With just a push of a button, the hammer switches from hammer to drill and vice versa.

Where the CP 0009A is Used

As the CP 0009A is a pneumatic combi-drill, it is mainly used across two main categories of work:

i. Drilling Mode

• Drilling holes in rock, concrete, and masonry for anchor bolts, rebar and fixing.

• Rock face drilling in quarry and mining rock for blast hole preparation

• Drilling holes in foundations and structures in construction sites

ii. Chipping / Hammer Mode

• Breaking and chipping concrete

• Removing of old anchor bolts or plugs from rocks

• Light demolition and chipping for surface preparation.

• Chasing/groving in concrete.

For any type of industry, construction, quarrying, underground mining, tunnelling, or general contracting, wherever the team needs a lightweight tool for making small holes and also light chipping and breaking, the Chicago Pneumatic CP 9A Rotary Drill serves the purpose without the need for swapping machines

Why Select the CP 0009A Rotary Drill

The CP 009A is a lightweight magical tool which every crew loves to have in their toolboxes. The combo feature of both drilling and breaking makes it a unique tool. With just the push of a button, the CP 0009A changes from a drill to a hammer and vice versa.

Thus, the CP 0009A saves you the cost of buying two separate tools for drilling and breaking.

It weighs only 4 kg, making it child's play to use it for longer hours at any angle, and being small, it allows one to reach and operate even in tight spaces.

The CP 0009A has a button to change the operation of the tool from hammering to rotation, unlike other variants of the CP 0009 Rotary Drill range, like the CP 009CS, in which to change the operation type of the tool, you also need to change the working tool or the rod.

So, with CP 9A, with the same rod, you can hammer or drill, thus saving a lot of time and effort.

It has the hole dia. capacity of a maximum of 32 mm and depth of 450 mm.

With RMT you can get a 100% original Chicago Pneumatic CP009A rotary drill and genuine CP spare parts.

If you are looking for an aftermarket option of CP 009A, you can check out our RMT 009B Rotary Drill. It is 100% equivalent with CP 0009A, and the spare parts are also 100% interchangeable.