A pneumatic drifter is a rock drilling machine used to drill blast holes in underground mines, tunnels, and quarrying operations. It runs on compressed air and is commonly mounted on crawler drills, jumbos, or feed systems. Unlike handheld rock drills, a drifter is designed for continuous drilling where speed, accuracy, and productivity are important.
In underground mining, drilling is one of the first steps before blasting. Every hole needs to be drilled at the correct angle and depth. If the drilling pattern is inaccurate, it can affect blasting efficiency and ore recovery. That is why many mining companies rely on a pneumatic drifter for underground mining that delivers consistent performance shift after shift.
A pneumatic drifter works using compressed air. The air powers a piston inside the machine, which repeatedly strikes the drill steel while it rotates. This continuous impact helps the drill bit cut through hard rock with accuracy. Since the machine has a simple mechanical design, it is easier to maintain and well-suited for underground environments where dust, moisture, and rough working conditions are part of everyday mining operations.
You will find rock drilling drifter machines in underground mines, tunneling projects, and mine development work around the world.
Underground mines are tough on equipment. Dust, moisture, vibration, and limited working space are part of everyday operations. Equipment must continue performing even when conditions become challenging. They need to keep working even when conditions are far from ideal. That is one of the reasons many operators continue to use a pneumatic drifter for underground mining. The compressed air system is simple, practical, and easier to maintain in remote mining locations.
Reliable drilling also directly impacts production. When blast holes are drilled accurately, blasting becomes more effective, and subsequent stages of mining can proceed with fewer delays. Less downtime also means more time spent drilling instead of servicing equipment.
Reliable drilling also directly impacts production. When blast holes are drilled accurately, blasting becomes more effective, and subsequent stages of mining can proceed with fewer delays. Less downtime also means more time spent drilling instead of servicing equipment.
We supply pneumatic drifters to mining companies across Russia, Australia, South Africa, Chile, India, and other mining regions. Many of these operations work in hard rock mines where equipment is expected to perform every day under demanding underground conditions. That is why durability, consistent drilling, and ease of maintenance remain key considerations when choosing a drifter.
At Rama Mining Tools, we design our pneumatic drifters for the realities of underground mining. Every machine is inspected and tested before dispatch to ensure dependable on-site performance.
| Feature | RMT 120F Pneumatic Drifter | RMT 120FZ Pneumatic Drifter |
|---|---|---|
| Primary Environment | Surface applications & light underground setups | Dedicated underground production & narrow drift setups |
| Best Application | Bench drilling, quarrying, grout holes, & light face drilling | Long-hole production drilling, sublevel stoping, & ring drilling |
| Ideal Rig Type | Surface wagon drills (RMT 25), simple column bars, & light rigs | Underground long-hole rigs (Simba Junior series) & heavy jumbo frames |
| Flushing & Setup | Standard air/water flushing ports for open bench operation | Reinforced air/water hose placement to protect against confined drift wear |
| Typical Projects | Road construction, foundational anchor drilling, open-pit quarrying | Underground stope development, mine access tunnels, drift advancement |
| Productivity Focus | Quick positioning and high penetration rates on open benches | Maximized durability and reduced hose wear in wet, tight, low-visibility drifts |
| Technical Specifications | RMT 120F | RMT 120 FZ |
|---|---|---|
| Weight | 70 kg / 154 lb | 71.5 kg / 157.6 lb |
| Length | 780 mm / 31″ | 780 mm / 31″ |
| Air Pressure | 7 bar / 102 psi | 7 bar / 102 psi |
| Air consumption | 167 l/s / 354 cfm | 167 l/s / 354 cfm |
| Piston Diameter | 120 mm / 4.7″ | 120 mm / 4.7″ |
| Piston Stroke | 65 mm / 2½” | 65 mm / 2½” |
| Hole dia (depth) option 1 | 48 – 57 mm (25 meters) / 2 – 2.24″ (82 ft) | 48 – 57 mm (25 meters) / 2 – 2.24” (82 ft) |
| Hole dia (depth) option 2 | 64 – 75 mm (15 meters) / 2.5 – 3″ (49 ft) | 64 – 75 mm (15 meters) / 2.5 – 3” (49 ft) |
| Impact Rate | 35 Hz | 35 Hz |
| Impact Power (Max) | 7.2 kW | 7.2 kW |
| Rotation Speed | 210 rpm | 210 rpm |
| Drill Steel | R32, R38, T38 | R32, R38, T38 |
Choosing the right pneumatic drifter starts with understanding your mining operation. Rock conditions, drilling depth, production targets, and working environment all influence the type of equipment you need. While the BBC 120F Drifter and RMT 120F Pneumatic Drifter (100% interchangeable with the original Atlas BBC 120F Drifter) are excellent choices for general underground mining, the RMT 120FZ Pneumatic Drifter is better suited for operations that require longer drilling cycles and higher production.
At Rama Mining Tools, we manufacture pneumatic drifters for underground mining, built for reliability, durability, and consistent performance. Every machine is inspected and tested before dispatch.
To discuss your layout configuration, request technical pricing, or order replacement parts, contact our international inquiries team today at amit@rminingtools.com via phone or WhatsApp at +91 89568 61781.