TEX 10 PS KL - Pick Hammer

The Tex 10 PSKL is similar to the Tex 10 PS (8461 0211 30). The only difference is the type of the retainer. The Tex 10 PS comes with a screw cap retainer, whereas the KL in the Tex 10 PSKL, the KL stands for Kick Latch retainer type. It means the working bit can be easily released by opening the latch with a kick. Thus reducing the time required for changing the working bit.

The Tex 10PSKL is suited for soil digging, light rock breaking and compact demolition tasks across construction, utility and mining maintenance applications.

Key Features of TEX 10 PS KL (8461021132) Atlac Copco 20 lb Chipper

• a. Kick-Latch Tool Retainer: Swap your moil points or chisels in seconds. Just kick the latch with your foot to unlock the tool—no manual wrenching required. Thus increasing the working hours of the tool.
• b. Built-In Air Cushioning: The piston glides on air cushions inside the cylinder. This stops metal-to-metal slamming, reduces vibration, and makes the parts last much longer.
• c. Polyurethane Muffler: Features a wear-resistant silencer that cuts harsh exhaust noise by up to 75%, making the job site safer for everyone.
• d. Super Slim Profile: Designed with a narrow body so you can get up close to walls and work easily in cramped trenches or tight spaces.

Why Select the TEX 10 PS KL Pick Hammer?

The Tex 10 PS KL is a lightweight pneumatic hammer which you can select if you are looking for a lightweight but powerful breaker. This tool not only does severe damage in demolition works, but also provides the comfort and luxury while operating the tool

1. Lightning-Fast Tool Changes

   The Advantage: The Tex 10PSKL uses a heavy-duty kick-latch mechanism to lock the steel chisel in place.

   The Comparison: Standard hammers like the Tex 10PS use threaded screw caps or screw-on retainers that get jammed with dirt and concrete dust. The kick-latch lets you swap bits instantly with your boot, saving a lot of time and increasing productivity.

2. Less Operator Fatigue

   The Advantage: Built with an internal air-cushion system and a soft rubber grip handle.

   The Comparison: Most pneumatic hammers rattle violently, shaking the operator's hands and causing quick exhaustion. Along with that, the internal parts also get worn out quickly due to the constant banging of the piston inside the cylinder.

   The Tex 10 PS KL is engineered with Atlas Copco trademark HAPS technology, which creates air cushioning inside the cylinder and thus restricts the piston from banging the internal parts when turned on and absorbs the shock internally. Thus, it not only reduces the vibration of the tool but also increases the lifespan of the internal spares of the machine

3. Long-Lasting Design with Low Maintenance

   The Advantage: Made with extra-strong, heat-treated steel and simple internal parts that do not break easily.

   The Comparison: lower-priced, low-quality tools break down quickly under pressure, causing frequent parts failure and costly project delays. In contrast, Atlas Copco tools are famous for lasting years with only basic, hassle-free maintenance.

With RMT you can get the original Atlas Copco Tex 10PSKL and its spare parts along with a wide range of other reliable Atlas Copco pneumatic hammers. Buy from the direct distributor of Atlas Copco tools from India.