CP 0122 - Pick Hammer

Weighing 11 kg (24 lb), the CP 0122 is ideal for utility work, site investigation and general ground preparation.

Where the CP 0122 Pick Hammer (8900000143) is Used

The range of the pneumatic paving breaker starts from around 20 kgs (40 lbs) to 45 kgs (90 lbs), and the chipping hammer range starts from around 5 kgs (10 lb class) to 9 kgs (20 lb class). Thus, the CP 0122 Pneumatic Pick hammer bridges the gap between the range of paving breakers and chipping hammers.

The CP 0122 is engineered as the most powerful pickhammer in the entire lineup. It delivers a perfect balance of weight and high-impact energy.

• • Construction & Renovation: Medium-to-heavy concrete demolition, wall breaching, and floor scaling.
• • Infrastructure: Bridge deck repairing and stripping away old asphalt or concrete layers.
• • Foundations: High-efficiency pile-capping and structural modifications.
• • Mining & Tunnelling: Soft rock tunnelling, clay digging, and trimming underground walls.

Why Select the CP 0122 Pick Hammer

While selecting any demolition hammer, buyers usually get confused about whether to select a heavy-weight paving breaker, which will do great demolition, but due to higher weight, it is not a flexible option to carry around in tight and difficult spaces. Also, is is tough to carry and use the heavy-weight pneumatic hammers for horizontal uses.

The next option is the Chipping Hammers. Though they are lightweight and can be easily carried, but they lack the impact power.

To resolve this dilemma, RMT brings you the range of pneumatic pick hammers, whose power-to-weight ratio is perfect for medium- to heavy demolition.

So, why will users buy CP 0122 Pick Hammer?

1. Unmatched Power-to-Weight Ratio

   The Advantage: It is one of the most powerful pickhammers in the entire Chicago Pneumatic lineup.

   Comparison: Weighing just 11.2 kg (24.7 lbs), it delivers up to 1,380 blows per minute. While competing tools in this weight class are restricted to light masonry and tile removal, the CP 0122 S packs enough percussive energy to crush relatively hard concrete, handle heavy-duty pile capping, and clear bridge decks.

2. Advanced Multi-Directional Maneuverability

   The Advantage: Designed with a highly streamlined, ultra-slim profile and a screw cap retainer.

   Comparison: Most industrial-grade alternatives use bulky, heavy latch retainers that add width and snag on obstacles. The slim screw cap on the CP 0122 S gives operators clear, unobstructed visibility of the chisel point and lets them easily operate vertically, horizontally, or overhead in confined or tight spaces.

3. Superior Job Site Safety & Comfort

   The Advantage: Features a built-in, newly upgraded polyurethane silencer system alongside advanced 3D vibration reduction.

   Comparison: Standard pneumatic picks blast un-muffled air right next to the operator, leading to rapid hearing damage and hand-arm vibration syndrome (HAVS). The CP 0122 S dampens kickback fatigue and guarantees a heavily reduced sound power level of 105 dB(A) without sacrificing the impact power of the tool.

4. Bulletproof "Inside Trigger" Durability

   The Advantage: Engineered with an integrated D-handle and a fully protected inside trigger design.

   Comparison: Tools with traditional external throttle levers frequently break when dropped on rocky job sites or banged against trench walls.

   The CP 0122 S comes with a completely enclosed trigger mechanism within the cast iron housing, preventing accidental startups and protecting against critical damage due to sudden impacts.

5. Industrial-Grade Longevity, Low Maintenance

   The Advantage: Made with extra-strong, heat-treated steel and simple internal parts that do not break easily

   Comparison: Unlike cheaper, lesser-known brands that experience frequent seal blowouts or internal stress fractures under continuous pressure, Chicago Pneumatic tools are legendary for their extended service intervals. It requires minimal toolroom maintenance to maintain peak operating efficiency over years of rugged use.

The CP 0122S (8900 0001 43) comes in a shank size of Hex 22 x 82.5 mm (7/8" x 3-1/4") and air inlet of standard ⅜” BSP.

With RMT you get the option to select from a wide range of pick hammers from both the Chicago Pneumatic and Atlas Copco ranges.

You can also select from the aftermarket options, which are 100% equivalent to the original models and are available at better pricing and quicker delivery.