Tex 03 PS Chipping Hammers are light hammers most suitable for overhead work where the working area is tricky or difficult to work on. The area behind pillars, and under stairs, are a few examples where working is difficult. For working in these areas you need a hammer that is light enough to use at any angle, even upwards, and still has enough power to do the job.
.png)
.png)
.png)
| Model # | TEX 03 PS | |
| Weight | 4 kg | 8.8 lb |
| Length | 300 mm | 11.8" |
| Air pressure | 7 bar | 102 psi |
| Air consumption | 6.9 l/s | 15 cfm |
| Blows per minute | 4080 | |
| Shank size (Hex) - 8461 0208 01 | 19 x 50 mm | ¾" x 2" |
| Retainer type | Screw cap | |
English
Español
русский
português
عربى
français
Polskie
Nederlands
Italiano
Türk
한국어
Deutsche
.png)
.jpg)
.png)
.png)
.png)
.png)